Vapor Block™ Fuel Line Sleeve - 0.375 (10mm) I.D. x 36 - Design

DEI Introduces Vapor Block™ Fuel Line Sleeve - Design Engineering, Inc

Converter Markets Selection Guide Datasheet by 3M

Design Engineering 010671 Vapor Block 3/8 I.D. x 36

Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection for wiring, hoses, oil, brakes and transmission lines.

Fire Sleeve™ & Tape Kit - 0.375 ID x 36

Design Engineering 010671 Vapor Block 3/8 I.D. x 36

3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Neoprene

Heatshield Products 204002 Black 1/2 Id X 2' Fuel Line Heat

Vapor Block solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation. Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block. Vapor Block fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install.

DEI Vapor Block Sleeve 1/2in ID x 36in

Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection for wiring, hoses, oil, brakes and transmission lines.

Fire Sleeve™ & Tape Kit - 0.375 ID x 36

Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection for wiring, hoses, oil, brakes and transmission lines.

Fire Sleeve™ & Tape Kit - 0.375 ID x 36

备件清单298_厦门纪扬科技有限公司

Vapor Block from Design Engineering, Inc.

Eaton Tube and Pipe Fitting Catalog by Site Dev - Issuu

3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Rubber Push

Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block™.

Vapor Block™ Fuel Line Sleeve - 0.375 (10mm) I.D. x 36