Tripp Lite Heavy Duty Power Extension Cord 30A 10 AWG NEMA L5 30P

Tripp Lite 14ft Power Cord Extension Cable L6-20P to C19 for PDU/UPS Heavy Duty 20A 12AWG 12' - power cable - NEMA L6-20 to IEC 60320 C19 - 14 ft

This AC WORKS brand locking generator extension cord [L530PR] is used with transfer switches, generator, industrial construction. The cable is an SOOW, 10/3, 30 Amp, copper wire with a 600 Volt rubber jacket staying flexible in cold weather. This extension cord comes in a 10ft. length.

AC WORKS 10ft. SOOW 10/3 3-Prong NEMA L5-30 30A 125V Generator Rubber Extension Cord

Tripp Lite 15 ft. Heavy Duty Power Extension Cord 30A 10 AWG L5-30P L5-30R (P046-015-LL-30A)

Tripp Lite Eaton Series Power Extension P022-003

P022-025-13A - Tripp Lite Power Extension Cord

Tripp Lite Heavy-Duty Power Extension Cord, 30A, 10 AWG (NEMA L5

Tripp Lite PDU Monitored 120V 30A 5-15/20R 16 Outlet L5-30P

Lenovo 2.8m C13 to NEMA Cord (90Y3016)

AC WORKS 30A L5-30P to Three 5-15R 25-ft 10/3-Prong Indoor/Outdoor Stw Heavy Duty Locking Extension Cord in the Extension Cords department at

Mastercraft 10AWG, 30A L14-30 Twist Lock Generator Extension Cord, 25-ft

TRIPP LITE Heavy Duty Power Extension Cord 30A 10 AWG L5-30P to L5-30R Locking Connectors 15', Black (P046-015-LL-30A) : Electronics

The P019-008-C15RA Heavy-Duty Power Cord features molded NEMA 5-15P and C15 connectors for attaching network hardware with a C16 inlet to a PDU, UPS system or other AC power source with a NEMA 5-15R outlet. This eight-foot cord supports voltages up to 125V. Its UL listed and features a flexible SJT jacket and 14 AWG wire for easy routing through tight areas. In addition, the C15 connector is fixed at a right angle to allow more room for the cord and allow equipment to be pushed against a wall.

Tripp Lite P019-008-C15RA 8ft Heavy Duty Power Extension Cord 15A 14AWG 5-15P to Right-Angle C15

1 Extension Cords - Office Depot

Tripp Lite Eaton Series P024-006-GY-HG